Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: LEDdriveDescription: Constant current LED driver, RCD-24 series - Non isolated wiring can drive up to ten 2W power LED constant current sources. The output current accuracy is ± 2%, the output current stability is ± 1%, and the efficiency is up to 96%. Wide input voltage range short circuit protection compact package connection data - wire | Function 1 (red) |+Vin 4 (black) | GND 5 (brown) | - VOut 6 (yellow) |+VOut # # #. Note that the rated value will not decrease at operating temperature. The average time between failures complies with MIL-HDBK-217F standard (25 ° C). # # # LED driver8837Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RCD-24-0.70/PL/B LED driver, DC/DC converter, constant current, adjustable, RCD-24-PL series, surface mount equipment, analog, digital, PWM, 24.5 W, 35 V4796Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: Recom 3W Constant Current LED Power Supply - RACD03 Series RACD03 Series 3W Constant Current LED Power Supply with Single Output. This low-cost constant current LED power supply comes with a universal AC input, suitable for driving 1 to 3 high-power LEDs. Universal input voltage range, constant current output capable of driving 1 to 3 high brightness LEDs 3kV AC isolation protection: overload, short circuit, output overvoltage, and over temperature IP66 level intrusion protection connected to harmonic current in accordance with EN61000-3:2: 2006 through 130mm lead wire design # # # Note stock number 737-7057 will drive 3 LEDs with a power of 1 W stock number 737-7051 will drive 1 LED with a power of 2 W for industrial use only, not within the scope of regulation (EC) number 125/2009. ###Standard design meets the standards: EN55015:2006 + A1: 2007 + A2:2009、EN 61000-3-2:2006、EN 61000-3-3: 2006、EN 61547: 1995 + A1:2000、UL1310、FCC18A Certification: EN61347-1:2008, EN61347-2-13:2006. Designed to comply with UL 8750 # # # Recom - Constant Current LED Power Supply3732Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: Recom 60W Constant Current LED Power Supply - RACD60 Series RACD60 Series 60W Open Rack and Constant Current LED Power Supply with Single Output, Universal AC Input, and Active Power Factor Correction. This 60W constant current LED power supply comes with a user adjustable output current limit and dual-mode operation: CV mode, where the power supply serves as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, user adjustable current limiting, overload and short circuit protection through 300mm cable connection, EMC compliance with EN55015, EN61347-1, EN61347-2-13, harmonic current compliance with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. The average time between failures complies with MIL-HDBK-217F standard # # # recognized cULus # # standard UL8750, cUL8750, EN61347 # # # Recom - constant current LED power supply9131Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD100-48 AC/DC LED power supply, active PFC, RACD100 series, 90 V, 305 V, 100 W, 2.1 A, 48 V1876Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100-A RACD150-A series Recom RACD100-A and RACD150-A series high-power dimmable constant current LED drivers provide a constant output current of 1400mA or 700mA (RACD100-A) at voltages ranging from 50V to 142V, and 1400mA, 1050mA or 700mA (RACD150-A) at voltages ranging from 60V to 210V. Both series of LED drivers support dimming through PWM or 1-10V signals, and are fully IP67 sealed, suitable for outdoor and indoor applications. These constant current LED drivers have a wide input range of 90 to 305V AC, with a full load efficiency of over 93%. They have active PFC and a power factor of over 0.98. They also provide comprehensive protection against short circuits, overloads, and overheating conditions. The two series of LED drivers combine the market demand for high voltage output, dimming function, and compact size, and have obtained green chip certification for high efficiency, low THD, and high power factor. The ideal applications of these constant current LED drivers are high-power area lighting, parking lots, warehouses, and safety lighting. High output voltage universal AC input constant current operation active power factor correction IP67 design, suitable for indoor and outdoor compact digital PWM and analog voltage dimming # # # Standard UL8750 EN61347-2-13 # # # Recom LED driver1679Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 60W LED Driver, constant current, RACD60-A series Recom RACD60-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD60-A has an input voltage range of 90 to 350V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 88%, with low THD and active PFC, a power factor of 0.98, and the RACD60-A series can prevent short circuits, overloads, and overheating. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. They are suitable for high brightness LED products with built-in active PFC function, overvoltage, short circuit, and overheating protection, and built-in three in one dimming IP67 rating # # # Standard UL8750 EN61347-1 EN61347-2-13 EN61000-3-2 Class C EN61000-3-3 EN61000-4-2,3,4,5,6,8,11 EN61547 EN55015 FCC15 # # # Recom LED Drivers5377Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD20-1050/277 AC/DC LED power supply, active PFC, RACD20/277 series, 90 V, 305 V, 20 W, 1.05 A, 19 V2775Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 60W LED Driver, constant current, RACD60-A series Recom RACD60-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD60-A has an input voltage range of 90 to 350V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 88%, with low THD and active PFC, a power factor of 0.98, and the RACD60-A series can prevent short circuits, overloads, and overheating. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. They are suitable for high brightness LED products with built-in active PFC function, overvoltage, short circuit, and overheating protection, and built-in three in one dimming IP67 rating # # # Standard UL8750 EN61347-1 EN61347-2-13 EN61000-3-2 Class C EN61000-3-3 EN61000-4-2,3,4,5,6,8,11 EN61547 EN55015 FCC15 # # # Recom LED Drivers6891Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 35W LED Driver, constant current, RACD35-A series Recom RACD35-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD35-A has an input voltage range of 90 to 305V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 83%, with source PFC and a power factor exceeding 0.90. The RACD35-A series can prevent short circuits, overvoltage, and overheating situations. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. 35W Class II AC-DC LED power supply with 500, 700, 1000, 1400mA or 2500mA output active power factor correction>0.90 efficiency up to 83% IP67 certification 3-in-1 dimming standard UL8750, EN61347, EN55015, EN61547 Recom LED driver8222Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD100-36 AC/DC LED power supply, active PFC, RACD100 series, 90 V, 305 V, 100 W, 2.8 A, 36 V3216Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 100W LED Driver, constant current constant voltage, RACD 100- PSE series Recom RACD100-PE is a series of fully sealed IP67 LED drivers. These LED drivers have dual-mode operation for constant current or constant voltage. They have active PFC with a power factor exceeding 0.98. They can also completely prevent short circuits, overvoltage, overcurrent, and overheating. These Recom power supplies are level 1, packaged in metal enclosures with a rated ambient temperature of -20 ° C to+50 ° C and a maximum enclosure temperature of 90 ° C. RACD100-PE is available for indoor and outdoor use; Applications include street and pedestrian lighting, LED signs, parking lots, public buildings, and tunnels. Universal AC input constant voltage and constant current operation active power factor correction IP67 designed for indoor and outdoor use with cooling through natural air convection PSE certification for the Japanese market # # # Standard PSE # # Recom LED driver5605Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: Recom 60W Constant current LED power supply, waterproof (IP67) - RACD60 series RACD60 series 60W waterproof constant current LED power supply, with single output, universal AC input, and active power factor correction. This 60W waterproof constant current LED power supply has dual-mode operation: CV mode, where the power supply acts as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, IP67 waterproof enclosure connected via 300mm cable, overload and short circuit protection, EMC compliant with EN55015, EN61347-1, EN61347-2-13, harmonic current compliant with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. Mean time between failures complies with MIL-HDBK-217F standard # # # Recognized cULs # # # Standard UL8750, cUL8750, EN61347 # # # Recom - Constant current LED power supply, IP rating8781Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD150-36 AC/DC LED power supply, active PFC, RACD150 series, 90 V, 305 V, 150 W, 4.2 A, 36 V4263Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 25W LED Driver, constant current, RACD25-A series Recom RACD25-A series is a series of dimmable LED drivers used for constant current LED lighting fixtures. RACD25-A has an input voltage range of 90 to 305V AC, which means they can be used globally. These two types of power supplies have a working efficiency of up to 81%, with source PFC and a power factor of 0.90. The RACD60-A series can prevent short circuits, overloads, and overheating situations. These LED drivers come with a three in one dimming function that can simulate PWM、 Or external resistor dimming for control. Due to their IP67 rated housing, these LED drivers are dustproof and moisture-proof, and can be installed outside of industrial or building environments as well as in damp rooms such as bathrooms or basements. 25W Class II AC-DC LED power supply with 350, 500, 700, 1050mA or 2100mA output active power factor correction>0.90 efficiency up to 81% IP67 certification 3-in-1 dimming standard UL8750, EN61347, EN55015, EN61547 Recom LED driver8888Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100-A RACD150-A series Recom RACD100-A and RACD150-A series high-power dimmable constant current LED drivers provide a constant output current of 1400mA or 700mA (RACD100-A) at voltages ranging from 50V to 142V, and 1400mA, 1050mA or 700mA (RACD150-A) at voltages ranging from 60V to 210V. Both series of LED drivers support dimming through PWM or 1-10V signals, and are fully IP67 sealed, suitable for outdoor and indoor applications. These constant current LED drivers have a wide input range of 90 to 305V AC, with a full load efficiency of over 93%. They have active PFC and a power factor of over 0.98. They also provide comprehensive protection against short circuits, overloads, and overheating conditions. The two series of LED drivers combine the market demand for high voltage output, dimming function, and compact size, and have obtained green chip certification for high efficiency, low THD, and high power factor. The ideal applications of these constant current LED drivers are high-power area lighting, parking lots, warehouses, and safety lighting. High output voltage universal AC input constant current operation active power factor correction IP67 design, suitable for indoor and outdoor compact digital PWM and analog voltage dimming # # # standard UL8750 EN61347-2-135941Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 150W AC-DC LED Power Supply 'LIGHTLINE' 3.75kV reg3063Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 150W LED Driver, constant current constant voltage, RACD 150- PSE series Recom RACD150-PSE is a series of fully sealed IP67 LED drivers. These LED drivers have dual-mode operation for constant current or constant voltage. They have active PFC with a power factor exceeding 0.98. They can also completely prevent short circuits, overvoltage, overcurrent, and overheating. These Recom power supplies are level 1, packaged in metal enclosures with a rated ambient temperature of -20 ° C to+50 ° C and a maximum enclosure temperature of 90 ° C. RACD150-PSE is available for indoor and outdoor use; Applications include street and pedestrian lighting, LED signs, parking lots, public buildings, and tunnels. Universal AC input constant voltage and constant current operation active power factor correction IP67 designed for indoor and outdoor use with cooling through natural air convection PSE certification for the Japanese market # # # Standard PSE # # Recom LED driver1937Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD20-700 AC/DC LED power supply, active PFC, RACD20 series, 90 V, 264 V, 20 W, 700 mA, 29 V1449Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100-A RACD150-A series Recom RACD100-A and RACD150-A series high-power dimmable constant current LED drivers provide a constant output current of 1400mA or 700mA (RACD100-A) at voltages ranging from 50V to 142V, and 1400mA, 1050mA or 700mA (RACD150-A) at voltages ranging from 60V to 210V. Both series of LED drivers support dimming through PWM or 1-10V signals, and are fully IP67 sealed, suitable for outdoor and indoor applications. These constant current LED drivers have a wide input range of 90 to 305V AC, with a full load efficiency of over 93%. They have active PFC and a power factor of over 0.98. They also provide comprehensive protection against short circuits, overloads, and overheating conditions. The two series of LED drivers combine the market demand for high voltage output, dimming function, and compact size, and have obtained green chip certification for high efficiency, low THD, and high power factor. The ideal applications of these constant current LED drivers are high-power area lighting, parking lots, warehouses, and safety lighting. High output voltage universal AC input constant current operation active power factor correction IP67 design, suitable for indoor and outdoor compact digital PWM and analog voltage dimming # # # Standard UL8750 EN61347-2-13 # # # Recom LED driver5200Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 100/150W Power supply, switch mode, RACD100/RACD150 series Recom RACD 100 and RACD 150 series are fully sealed IP67 LED drivers, both series have dual-mode operation for constant current or constant voltage, they have active PFC and power factor over 0.98, and also provide comprehensive protection against short circuits, open circuits, overloads, and overheating situations. These Recom power supplies are Class 1, packaged in metal enclosures, with a rated ambient temperature of -30 ° C to+70 ° C and a maximum enclosure temperature of 95 ° C. RACD100 and RACD150 are suitable for indoor and outdoor use; Applications include street and pedestrian lighting, LED signs, parking lots, public buildings, and tunnels. Universal AC input constant voltage and constant current operation CE and UL certification level 1 LED driver active power factor correction IP67 designed for indoor and outdoor use cooled by natural air convection 5-year warranty # # # UL 8750 and EN 61347-1 # # Recom LED driver7923Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: LEDPower supply 150W 90-305Vin 48V ENEC CERTIFIED6177Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: 60W AC-DC LED Power Supply 'LIGHTLINE' 3.75kV reg AC-DC LED Power Supply 60W Single 5Pin5233Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD100-12 AC/DC LED power supply, active PFC, RACD100 series, 90 V, 305 V, 100 W, 8.3 A, 12 V9818Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: Recom 60W Constant current LED power supply, waterproof (IP67) - RACD60 series RACD60 series 60W waterproof constant current LED power supply, with single output, universal AC input, and active power factor correction. This 60W waterproof constant current LED power supply has dual-mode operation: CV mode, where the power supply acts as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, IP67 waterproof enclosure connected via 300mm cable, overload and short circuit protection, EMC compliant with EN55015, EN61347-1, EN61347-2-13, harmonic current compliant with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. Mean time between failures complies with MIL-HDBK-217F standard # # # Recognized cULs # # # Standard UL8750, cUL8750, EN61347 # # # Recom - Constant current LED power supply, IP rating5395Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: Recom 60W Constant Current LED Power Supply - RACD60 Series RACD60 Series 60W Open Rack and Constant Current LED Power Supply with Single Output, Universal AC Input, and Active Power Factor Correction. This 60W constant current LED power supply comes with a user adjustable output current limit and dual-mode operation: CV mode, where the power supply serves as a fixed voltage source when the load is below the preset current limit. In CC mode, when the load exceeds the preset current limit, the power supply acts as a fixed current source. These two modes enable the LED power supply to be used together with both CV and CC LED modules. Universal input voltage range, constant current output, dual-mode CV or CC output, active power factor correction, user adjustable current limiting, overload and short circuit protection through 300mm cable connection, EMC compliance with EN55015, EN61347-1, EN61347-2-13, harmonic current compliance with EN61000-3-2 (Class C, full load) and EN61000-3-3 # # # Note: For industrial use only, not within the scope of Regulation (EC) No. 125/2009. The average time between failures complies with MIL-HDBK-217F standard # # # recognized cULus # # standard UL8750, cUL8750, EN61347 # # # Recom - constant current LED power supply1202Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD150-48 AC/DC LED power supply, active PFC, RACD150 series, 90 V, 305 V, 150 W, 3.2 A, 48 V4843Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD20-350 AC/DC LED power supply, active PFC, RACD20 series, 90 V, 264 V, 20 W, 350 mA, 56 V1956Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD20-500/277 AC/DC LED power supply, active PFC, RACD20/277 series, 90 V, 305 V, 20 W, 500 mA, 40 V7018Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
-
![]()
Category: LEDdriveDescription: RECOM POWER RACD07-700 LED driver, AC-DC, constant current, 0.7A, 11V9815Get WhatsApp QuoteBOM Quote
Scan with WhatsApp to get a quote
